Tuesday, October 20, 2015

Pier A Mid Trace

Antikythera mechanism

From Wikipedia, the free encyclopedia
For the BT song "The Antikythera Mechanism", see This Binary Universe.
The Antikythera mechanism (Fragment A – front)
The Antikythera mechanism (Fragment A – back)
The Antikythera mechanism (/ˌæntɨkɨˈθɪərə/ ant-i-ki-theer or/ˌæntɨˈkɪθərə/ ant-i-kith-ə-rə) is an ancient analog computer[1][2][3][4]designed to predict astronomical positions and eclipses for calendricaland astrological purposes,[5][6][7] as well as the Olympiads, the cycles of the ancient Olympic Games.[8]
Found housed in a 340 mm × 180 mm × 90 mm wooden box, the device is a complex clockwork mechanism composed of at least 30 meshingbronze gears. Its remains were found as 82 separate fragments, of which only seven contain any gears or significant inscriptions.[9][10] The largest gear (clearly visible in Fragment A at right) is approximately 140 mm in diameter and originally had 223 teeth.
The artifact was recovered in 1900–1901 from the Antikythera shipwreck off the Greek island of Antikythera.[11] Believed to have been designed and constructed by Greek scientists, the instrument has been dated either between 150 and 100 BCE,[5] or, according to a more recent view, at 205 BCE.[12][13]
After the knowledge of this technology was lost at some point inAntiquity, technological artifacts approaching its complexity and workmanship did not appear again until the development of mechanicalastronomical clocks in Europe in the fourteenth century.[14]
All known fragments of the Antikythera mechanism are kept at theNational Archaeological Museum of Athens.[15]


See also: Antikythera wreck


The Antikythera mechanism was discovered in 45 metres (148 ft) of water in the Antikythera shipwreck off Point Glyphadia on the Greek island of Antikythera. The wreck was found in April 1900 by a group of Greek sponge divers, who retrieved numerous artifacts, including bronze and marble statues, pottery, unique glassware, jewellery, coins, and the mechanism. All were transferred to the National Museum of Archaeology in Athens for storage and analysis. Merely a lump of corroded bronze and wood at the time, the mechanism went unnoticed for two years while museum staff worked on piecing together more obvious statues.[14]
On 17 May 1902, archaeologist Valerios Stais was examining the finds and noticed that one of the pieces of rock had a gear wheel embedded in it. Stais initially believed it was an astronomical clock, but most scholars considered the device to be prochronistic, too complex to have been constructed during the same period as the other pieces that had been discovered. Investigations into the object were soon dropped until Derek J. de Solla Price became interested in it in 1951.[16] In 1971, both Price and a Greek nuclear physicist named Charalampos Karakalos made X-ray and gamma-ray images of the 82 fragments. Price published an extensive 70-page paper on their findings in 1974.[14]
It is not known how the mechanism came to be on the cargo ship, but it has been suggested that it was being taken to Rome, together with other treasure looted from the island, to support a triumphal parade being staged by Julius Caesar.[17]


Generally referred to as the first known analog computer,[18] the quality and complexity of the mechanism's manufacture suggests it has undiscovered predecessors made during the Hellenistic period.[19] Its construction relied upon theories of astronomy and mathematics developed by Greek astronomers, and is estimated to have been created around the latesecond century BCE.[5]
In 1974, British science historian and Yale University professor Derek de Solla Price concluded from gear settings and inscriptions on the mechanism's faces that it was made about 87 BCE and lost only a few years later.[11] Jacques Cousteau and associates visited the wreck in 1976 [20] and recovered coins dated to between 76 and 67 BCE.[21] Though its advanced state of corrosion has made it impossible to perform an accurate compositional analysis, it is believed the device was made of a low-tin bronze alloy (of approximately 95% copper, 5% tin).[22] All its instructions are written inKoine Greek, and the consensus among scholars is that the mechanism was made in the Greek-speaking world.[6]
In the late 2000s, findings of The Antikythera Mechanism Research Project suggest the concept for the mechanism originated in the colonies of Corinth, since some of the astronomical calculations seem to indicate observations that can be made only in the Corinth area of ancient Greece. Syracuse was a colony of Corinth and the home of Archimedes, which might imply a connection with the school of Archimedes.[8] Another theory suggests that coins found by Jacques Cousteau in the 1970s at the wreck site date to the time of the device's construction, and posits its origin may have been from the ancient Greek city of Pergamon,[23] home of the famous Library of Pergamum. With its many scrolls of art and science, it was second in importance only to the Library of Alexandria during the Hellenistic period.[24]
The ship carrying the device also contained vases in the Rhodian style, leading to a hypothesis the device was constructed at an academy founded by the Stoic philosopher Posidonius on that Greek island. A busy trading port in Antiquity, Rhodes was also a center of astronomy and mechanical engineering, home to the astronomer Hipparchus, active from about 140 BCE to 120 BCE. That the mechanism uses Hipparchus's theory for the motion of the moon suggests the possibility he may have designed, or at least worked on it.[14]
Cardiff University professor Michael Edmunds, who led a 2006 study of the mechanism, described the device as "just extraordinary, the only thing of its kind", and said that its astronomy was "exactly right". He regarded the Antikythera mechanism as "more valuable than the Mona Lisa".[25][26]
In 2014, a study by Carman and Evans argued for a new dating of approximately 200 BCE.[12][13] Moreover, according to Carman and Evans, the Babylonian arithmetic style of prediction fits much better with the device's predictive models than the traditional Greek trigonometric style.[12]
In mid-2014, a diving expedition to the shipwreck initiated by the Hellenic Ministry of Culture and Sports hoped to discover further parts of the Antikythera Mechanism but was cut short due to bad weather. Another expedition is planned for spring 2015.[13]


The original mechanism apparently came out of the Mediterranean as a single encrusted piece. Soon afterward it fractured into three major pieces. Other small pieces have broken off in the interim from cleaning and handling,[27] and still others were found on the sea floor by the Cousteau expedition. Other fragments may still be in storage, undiscovered since their initial recovery; Fragment F came to light in that way in 2005. Of the 82 known fragments, seven are mechanically significant and contain the majority of the mechanism and inscriptions. There are also 16 smaller parts that contain fractional and incomplete inscriptions.[5][28][29]

Major fragments[edit]

FragmentSize [mm]Weight [g]GearsInscriptionsNotes
A180 × 150369.127YesThe main fragment and contains the majority of the known mechanism. Clearly visible on the front is the large b1 gear, and under closer inspection further gears behind said gear (parts of the l, m, c, and d trains are clearly visible as gears to the naked eye). The crank mechanism socket and the side-mounted gear that meshes with b1 is on Fragment A. The back of the fragment contains the rearmost e and k gears for synthesis of the moon anomaly, noticeable also is the pin and slot mechanism of the k train. It is noticed from detailed scans of the fragment that all gears are very closely packed and have sustained damage and displacement due to their years in the sea. The fragment is approximately 30 mm thick at its thickest point.
Fragment A also contains divisions of the upper left quarter of the Saros spiral and 14 inscriptions from said spiral. The fragment also contains inscriptions for the Exeligmos dial and visible on the back surface the remnants of the dial face. Finally, this fragment contains some back door inscriptions.
B125 × 6099.41YesContains approximately the bottom right third of the Metonic spiral and inscriptions of both the spiral and back door of the mechanism. The Metonic scale would have consisted of 235 cells of which 49 have been deciphered from fragment B either in whole or partially. The rest so far are assumed from knowledge of the Metonic cycle. This fragment also contains a single gear (o1) used in the Olympic train.
C120 × 11063.81YesContains parts of the upper right of the front dial face showing calendar and zodiac inscriptions. This fragment also contains the moon indicator dial assembly including the moon phase sphere in its housing and a single bevel gear (ma1) used in the moon phase indication system.
D45 × 3515.01Contains at least one unknown gear and according to Michael T. Wright possibly two. Their purpose and position has not been ascertained to any accuracy or consensus, but lends to the debate for the possible planet displays on the face of the mechanism.
E60 × 3522.1YesFound in 1976 and contains 6 inscriptions from the upper right of the Saros spiral.
F90 × 8086.2YesFound in 2005 and contains 16 inscriptions from the lower right of the Saros spiral. It also contains remnants of the mechanism's wooden housing.
G125 × 11031.7YesA combination of fragments taken from fragment C while cleaning.

Minor fragments[edit]

Many of the smaller fragments that have been found contain nothing of apparent value, however, a few have some inscriptions on them. Fragment 19 contains significant back door inscriptions including one reading "...76 years...." which refers to the Callippic cycle. Other inscriptions seem to describe the function of the back dials. In addition to this important minor fragment, 15 further minor fragments have remnants of inscriptions on them.[30]


Schematic of the artifact's known mechanism
Information on the specific data gleaned from the ruins by the latest inquiries are detailed in the supplement to Freeth's 2006 Nature article.[5]


On the front face of the mechanism (see reproduction here:[31]) there is a fixed ring dial representing the ecliptic, the twelve zodiacal signs marked off with equal 30 degree sectors. This matched with the Babylonian custom of assigning one twelfth of the ecliptic to each zodiac sign equally, even though the constellationboundaries were variable. Outside of that dial is another ring which is rotatable, marked off with the months and days of the Sothic Egyptian calendar, twelve months of 30 days plus five intercalary days. The months are marked with the Egyptian names for the months transcribed into the Greek alphabet. The first task, then, is to rotate the Egyptian calendar ring to match the current zodiac points. The Egyptian calendar ignored leap days, so it advanced through a full zodiac sign in about 120 years.[6]
The mechanism was operated by turning a small hand crank (now lost) which was linked via a crown gear to the largest gear, the four-spoked gear visible on the front of fragment A, the gear named b1. This moved the date pointer on the front dial, which would be set to the correct Egyptian calendar day. The year is not selectable, so it is necessary to know the year currently set, or by looking up the cycles indicated by the various calendar cycle indicators on the back in the Babylonian ephemeris tables for the day of the year currently set, since most of the calendar cycles are not synchronous with the year. The crank moves the date pointer about 78 days per full rotation, so hitting a particular day on the dial would be easily possible if the mechanism was in good working condition. The action of turning the hand crank would also cause all interlocked gears within the mechanism to rotate, resulting in the simultaneous calculation of the position of the Sun and Moon, the moon phaseeclipse, and calendar cycles, and perhaps the locations of planets.[32]
The operator also had to be aware of the position of the spiral dial pointers on the two large dials on the back. The pointer had a "follower" that tracked the spiral incisions in the metal as the dials incorporated four and five full rotations of the pointers. When a pointer reached the terminal month location at either end of the spiral, the pointer's follower had to be manually moved to the other end of the spiral before proceeding further.[5]


Computer-generated front panel of the Freeth model

Front face[edit]

The front dial has two concentric, circular scales that represent the path of theecliptic through the heavens. The outer ring is marked off with the days of the 365-day Egyptian calendar, or the Sothic year, based on the Sothic cycle. On the inner ring, there is a second dial marked with the Greek signs of the Zodiac and it is divided into degrees. The outer calendar dial may be moved against the inner dial to compensate for the effect of the extra quarter day in the solar year by turning the scale backward one day every four years. A 36514-day year was used in the Callippic cycle circa 330 BCE and in the Decree of Canopus during 238 BCE, but that is not reflected in the dials.[citation needed]
The position of the sun on the ecliptic is synonymous with the current date in the year. The moon and the five planets known to the Greeks travel along the ecliptic fairly closely, close enough that it made sense defining their position on the ecliptic.
The following Egyptian months are inscribed, in Greek letters on the outer ring:
  • ΘΟΘ (Thoth)
  • ΦΑΩΦΙ (Phaophi)
  • ΑΟΤΡ (Athyr, Hathor)
  • ΧΟΙΑΚ (Choiak)
  • ΤΥΒΙ (Tybi)
  • ΜΕΧΕΙΡ (Mecheir)
  • ΦΑΜΕΝΩΘ (Phamenoth)
  • ΦΑΡΜΟΥΘΙ (Pharmouthi)
  • ΠΑΧΩΝ (Pachon)
  • ΠΑΥΝΙ (Payni)
  • ΕΠΙΦΙ (Epiphi)
  • ΜΕΣΟΡΗ (Mesore)
  • ΕΠ (Ep[agomene])
The Zodiac dial contains Greek inscriptions of the members of the zodiac, which is believed to be adapted to the tropical month version rather than the sidereal:[30]

Front panel of a 2007 reproduction
  • ΚΡIOΣ (Krios [Ram], Aries)
  • ΤΑΥΡΟΣ (Tauros [Bull], Taurus)
  • ΔIΔΥΜΟΙ (Didymoi [Twins], Gemini)
  • ΚΑΡΚIΝΟΣ (Karkinos [Crab], Cancer)
  • ΛEΩΝ (Leon [Lion], Leo)
  • ΠΑΡΘEΝΟΣ (Parthenos [Maiden], Virgo)
  • ΧΗΛΑΙ (Chelai [Scorpio's Claw or Zygos], Libra)
  • ΣΚΟΡΠΙΟΣ (Skorpios [Scorpion], Scorpio)
  • ΤΟΞΩΤΗΣ (Toxotes [Archer], Sagittarius)
  • ΑIΓOΚΕΡΩΣ (Aigokeros [Sea goat], Capricorn)
  • YΔΡΟΚΟΟΣ (Hydrokoos [Water carrier], Aquarius)
  • IΧΘΕIΣ (Ichtheis [Fish], Pisces)
Also on the zodiac dial are a number of single characters at specific points (see reconstruction here:[31]). They are keyed to a parapegma, a precursor of the modern day almanac inscribed on the front face beyond the dials. They mark the locations of longitudes on the ecliptic for specific stars. Some of the parapegma reads (brackets indicate inferred text):
  • {Κ} Evening
  • {Λ} The Hyades set in the evening
  • {Μ} Taurus begins to rise
  • {N} Vega rises in the evening
  • {Θ} The Pleiades rise in the morning
  • {Ο} The Hyades rise in the morning
  • {Π} Gemini begins to rise
  • {Ρ} Altair rises in the evening
  • {Σ} Arcturus sets in the morning
At least two pointers indicated positions of bodies upon the ecliptic. A lunar pointer indicated the position of the moon, and a mean sun pointer also was shown, perhaps doubling as the current date pointer. The moon position was not a simple mean moon indicator that would indicate movement uniformly around a circular orbit; it allowed for the acceleration and deceleration typical of what is known today is an elliptical orbit, through the earliest extant use ofepicyclic gearing.
It also tracked the precession of the elliptical orbit around the ecliptic in a 8.88 year cycle. The mean sun position is, by definition, the current date. It is speculated that since such pains were taken to get the position of the moon correct,[30]then there also was likely to have been a "true sun" pointer in addition to the mean sun pointer likewise, to track the elliptical anomaly of the sun (the orbit of Earth around the sun), but there is no evidence of it among the ruins of the mechanism found to date.[6] Similarly, neither is there the evidence of planetary orbit pointers for the five planets known to the Greeks among the ruins. See Proposed planet indication gearing schemes below.
Finally, mechanical engineer Michael Wright has demonstrated that there was a mechanism to supply the lunar phase in addition to the position.[33] The indicator was a small ball embedded in the lunar pointer, half-white and half-black, which rotated to show the phase (new, first quarter, half, third quarter, full, and back) graphically. The data to support this function is available given the sun and moon positions as angular rotations; essentially, it is the angle between the two, translated into the rotation of the ball. It requires a differential gear, a gearing arrangement that sums or differences two angular inputs. Among its other first-known aspects, the Antikythera Mechanism is the earliest extant construction of a deliberate differential gear scheme in history.[citation needed]

Rear face[edit]

Computer-generated back panel
In July 2008, scientists reported new findings in the journal Nature showing that the mechanism not only tracked the Metonic calendar and predicted solar eclipses, but also calculated the timing of the Ancient Olympic Games.[8]Inscriptions on the instrument closely match the names of the months that are used on calendars from Illyria and Epirus in northwestern Greece and with the island of Corfu.[34][35]
On the back of the mechanism, there are five dials: the two large displays, theMetonic and the Saros, and three smaller indicators, the Olympiad,[28] theCallippic, and the Exeligmos.[5]
The Metonic Dial is the main upper dial on the rear of the mechanism. The Metonic cycle, defined in several physical units, is 235 synodic months, which is very close (to within less than 13 one-millionths) to 19 tropical years. It is therefore a convenient interval over which to convert between lunar and solar calendars. The Metonic dial covers 235 months in 5 rotations of the dial, following a spiral track with a follower on the pointer that keeps track of the layer of the spiral. The pointer points to the synodic month, counted from new moon to new moon, and the cell contains the Corinthian month names:[citation needed]
  1. ΦΟΙΝΙΚΑΙΟΣ (Phoinikaios)
  2. ΚΡΑΝΕΙΟΣ (Kraneios)
  3. ΛΑΝΟΤΡΟΠΙΟΣ (Lanotropios)
  4. ΜΑΧΑΝΕΥΣ (Machaneus)
  5. ΔΩΔΕΚΑΤΕΥΣ (Dodekateus)
  6. ΕΥΚΛΕΙΟΣ (Eukleios)
  7. ΑΡΤΕΜΙΣΙΟΣ (Artemisios)
  8. ΨΥΔΡΕΥΣ (Psydreus)
  9. ΓΑΜΕΙΛΙΟΣ (Gameilios)
  10. ΑΓΡΙΑΝΙΟΣ (Agrianios)
  11. ΠΑΝΑΜΟΣ (Panamos)
  12. ΑΠΕΛΛΑΙΟΣ (Apellaios)
Thus, setting the correct solar time (in days) on the front panel indicates the current lunar month on the back panel, with resolution to within a week or so.
The Callippic dial is the left secondary upper dial, which follows a 76-year cycle. The Callippic cycle is four Metonic cycles, and this dial indicates which of the four Metonic cycles is the current one in the Callippic cycle.[citation needed]
The Olympiad dial is the right secondary upper dial; it is the only pointer on the instrument that travels in a counter-clockwise direction as time advances. The dial is divided into four sectors, each of which is inscribed with a year indicator and the name of two Panhellenic Games: the "crown" games of IsthmiaOlympiaNemea, and Pythia; and two lesser games: Naa (held at Dodona) and another Olympiad location that to date, has not been deciphered.[36] The inscriptions on each one of the four divisions are:[5][28]
Olympic dial
Year of the cycleInside the dial inscriptionOutside the dial inscription
1LAΙΣΘΜΙΑ (Isthmia)
ΟΛΥΜΠΙΑ (Olympia)
2LBNEMEA (Nemea)
NAA (Naa)
3ΙΣΘΜΙΑ (Isthmia)
ΠΥΘΙΑ (Pythia)
4L∆ΝΕΜΕΑ (Nemea)
The Saros dial is the main lower spiral dial on the rear of the mechanism.[5] The Saros cycle is 18 years and 11-1/3 days long (6585.333... days), which is very close to 223 synodic months (6585.3211 days). It is defined as the cycle of repetition of the positions required to cause solar and lunar eclipses, and therefore, it could be used to predict them — not only the month, but the day and time of day. Note that the cycle is approximately 8 hours longer than an integer number of days. Translated into global spin, that means an eclipse occurs not only eight hours later, but 1/3 of a rotation farther to the west. Glyphs in 51 of the 223 synodic month cells of the dial specify the occurrence of 38 lunar and 27 solar eclipses. Some of the abbreviations in the glyphs read:
  • Σ = ΣΕΛΗΝΗ (Moon)
  • Η = ΗΛΙΟΣ (Sun)
  • H\M = ΗΜΕΡΑΣ (of the day)
  • ω\ρ = ωρα (hour)
  • N\Y = ΝΥΚΤΟΣ (of the night)
The glyphs show whether the designated eclipse is solar or lunar, and give the day of the month and hour; obviously, solar eclipses may not be visible at any given point, and lunar eclipses are visible only if the moon is above the horizon at the appointed hour.[30]
The Exeligmos Dial is the secondary lower dial on the rear of the mechanism. The Exeligmos cycle is a 54-year triple Saros cycle, that is 19,756 days long. Since the length of the Saros cycle is to a third of a day (eight hours), so a full Exeligmos cycle returns counting to integer days, hence the inscriptions. The labels on its three divisions are:[5]
  • Blank (representing the number zero)
  • H (number 8)
  • Iϛ (number 16)
Thus the dial pointer indicates how many hours must be added to the glyph times of the Saros dial in order to calculate the exact eclipse times.


The mechanism has a wooden casing with a front and a back door, both containing inscriptions.[8][30] The back door appears to be the "Instruction Manual". On one of its fragments is written "76 years, 19 years" representing the Callippic and Metonic cycles. Also written is "223" for the Saros cycle. On another one of its fragments is written on the spiral subdivisions "235" for the Metonic dial.


The mechanism is remarkable for the level of miniaturisation and the complexity of its parts, which is comparable to that of fourteenth-century astronomical clocks. It has at least 30 gears, although mechanism expert Michael Wright has suggested that the Greeks of this period were capable of implementing a system with many more gears.[32]
There is much debate that the mechanism may have had indicators for all five of the planets known to the ancient Greeks. No gearing for such a planetary display survives and all gears are accounted for—with the exception of one 63 toothed gear (r1) otherwise unaccounted for in fragment D.[6]
The purpose of the front face was to position astronomical bodies with respect to the celestial sphere along the ecliptic, in reference to the observer's position on the Earth. That is irrelevant to the question of whether that position was computed using a heliocentric or geocentric view of the solar system; either computational method should and does, result in the same position (ignoring ellipticity), within the error factors of the mechanism.
Ptolemy's epicyclic solar system (still 300 years in the future from the apparent date of the mechanism), carried forward with more epicycles, was more accurate predicting the positions of planets than the view of Copernicus, until Kepler introduced the possibility that orbits are ellipses.[37]
Evans et al. suggest that to display the mean positions of the five classical planets would require only 17 further gears that could be positioned in front of the large driving gear and indicated using individual circular dials on the face.[38]
Tony Freeth and Alexander Jones have modeled and published details of a version using several gear trains mechanically-similar to the lunar anomaly system allowing for indication of the positions of the planets as well as synthesis of the sun anomaly. Their system, they claim, is more authentic than Wright's model as it uses the known skill sets of the Greeks of that period and does not add excessive complexity or internal stresses to the machine.[6]
The gear teeth were in the form of equilateral triangles with an average circular pitch of 1.6 mm, an average wheel thickness of 1.4 mm and an average air gap between gears of 1.2 mm. The teeth probably were created from a blank bronze round using hand tools; this is evident because not all of them are even.[6] Due to advances in imaging and X-raytechnology it is now possible to know the precise number of teeth and size of the gears within the located fragments. Thus the basic operation of the device is no longer a mystery and has been replicated accurately. The major unknown remains, the question of the presence and nature of any planet indicators.[39]
A table of the gears, their teeth, and the expected and computed rotations of various of the important gears follows. The gear functions come from Freeth et al. (2008)[8] and those for the lower half of the table from Freeth and Jones 2012.[6]The computed values start with 1 year/revolution for the b1 gear, and the remainder are computed directly from gear teeth ratios. The gears marked with an asterisk (*) are missing, or have predecessors missing, from the known mechanism; these gears have been calculated with reasonable gear teeth counts.[8][30]
The Antikythera Mechanism: known gears and accuracy of computation
Gear name[table 1]Function of the gear/pointerExpected simulated interval of a full circular revolutionMechanism Formula[table 2]Computed intervalGear direction[table 3]
XYear gear1 tropical year1 (by definition)1 year (presumed)ccw[table 4]
Bthe moon's orbit1 sidereal month (27.321661 days)Time(B) = Time(X) * C1 / B2 * D1 / C2 * E2 / D2 * K1 / E5 * E6 / K2 * B3 / E127.321 days[table 5]ccw
Rlunar phase display1 synodic month (29.530589 days)Time(R) = 1 / (1 / Time(B2 [mean sun] or sun3 [true sun])) - (1 / Time(B)))29.530 days[table 5]
N*Metonic pointerMetonic cycle () / 5 spirals around the dial = 1387.94 daysTime(N) = Time(X) * (L1 / B2) * (M1 /L2) * (N1 / M2)1387.9 dayscw[table 6]
O*Olympiad pointer4 yearsTime(O) = Time(N) * (O1 / N2)4.00 yearsccw[table 6][table 7]
Q*Callippic pointer27758.8 daysTime(Q) = Time(N) * (P1 / N3) * (Q1 /P2)27758 dayscw[table 6]
E*lunar orbit precession8.85 yearsTime(E) = Time(X) * (L1 / B2) * (M1 / L2) * (E3 / M3)8.8826 yearscw[table 8]
G*Saros cycleSaros time / 4 turns = 1646.33 daysTime(G) = Time(E) * (F1 / E4) * (G1 / F2)1646.3 dayscw[table 6]
I*Exeligmos pointer19755.8 daysTime(I) = Time(G) * (H1 / G2) * (I1 / H2)19756 dayscw[table 6]
The following are proposed gearing from the 2012 Freeth and Jones reconstruction:
sun3*True sun pointer1 mean yearTime(sun3) = Time(X) * (sun3 / sun1) * (sun2 / sun3)1 mean year[table 5]ccw[table 9]
mer2*Mercury pointer115.88 days (synodic period)Time(mer2) = Time(X) * (mer2 / mer1)115.89 days[table 5]ccw[table 9]
ven2*Venus pointer583.93 days (synodic period)Time(ven2) = Time(X) * (ven1 / sun1)584.39 days[table 5]ccw[table 9]
mars4*Mars pointer779.96 days (synodic period)Time(mars4) = Time(X) * (mars2 / mars1) * (mars4 / mars3)779.84 days[table 5]ccw[table 9]
jup4*Jupiter pointer398.88 days (synodic period)Time(jup4) = Time(X) * (jup2 / jup1) * (jup4 / jup3)398.88 days[table 5]ccw[table 9]
sat4*Saturn pointer378.09 days (synodic period)Time(sat4) = Time(X) * (sat2 / sat1) * (sat4 / sat3)378.06 days[table 5]ccw[table 9]
Table notes:
  1. Jump up^ Change from traditional naming: X is the main year axis, turns once per year with gear B1. The B axis is the axis with gears B3 and B6, while the E axis is the axis with gears E3 and E4. Other axes on E (E1/E6 and E2/E5) are irrelevant to this table.
  2. Jump up^ "Time" is the interval represented by one complete revolution of the gear.
  3. Jump up^ As viewed from the front of the Mechanism. The "natural" view is viewing the side of the Mechanism the dial/pointer in question is actually displayed on.
  4. Jump up^ The Greeks, being in the northern hemisphere, assumed proper daily motion of the stars was from east to west, ccw when the ecliptic and zodiac is viewed to the south. As viewed on the front of the Mechanism.
  5. Jump up to:a b c d e f g h On average, due to epicyclic gearing causing accelerations and decelerations.
  6. Jump up to:a b c d e Being on the reverse side of the box, the "natural" rotation is the opposite
  7. Jump up^ This was the only visual pointer naturally traveling in the clockwise direction.
  8. Jump up^ Internal and not visible.
  9. Jump up to:a b c d e f Prograde motion; retrograde is obviously the opposite direction.
There are several gear ratios for each planet that result in close matches to the correct values for synodic periods of the planets and the sun. The ones chosen above seem to provide good accuracy with reasonable tooth counts, but the specific gears that may have been used are, and probably will remain, unknown.[6]

Known gear scheme[edit]

A schematic representation of the gearing of the Antikythera Mechanism, including the 2012 published interpretation of existing gearing, gearing added to complete known functions, and proposed gearing to accomplish additional functions, namely true sun pointer and pointers for the five then-known planets, as proposed by Freeth and Jones, 2012.[6] Based also upon similar drawing in the Freeth 2006 Supplement[30] and Wright 2005, Epicycles Part 2.[40]Proposed (as opposed to known from the artifact) gearing crosshatched.
The Sun gear is operated from the hand-operated crank (connected to gear a1, driving the large four-spoked mean sun gear, b1) and in turn drives the rest of the gear sets. The sun gear is b1/b2 and b2 has 64 teeth. It directly drives the date/mean sun pointer (there may have been a second, "true sun" pointer that displayed the sun's elliptical anomaly; it is discussed below in the Freeth reconstruction). In this discussion, reference is to modeled rotational period of various pointers and indicators; they all assume the input rotation of the b1 gear of 360 degrees, corresponding with one tropical year, and are computed solely on the basis of the gear ratios of the gears named.[5][28][41]
The Moon train starts with gear b1 and proceeds through c1, c2, d1, d2, e2, e5, k1, k2, e6, e1, and b3 to the moon pointer on the front face. The gears k1 and k2 form an epicyclic gear system; they are an identical pair of gears that don't mesh, but rather, they operate face-to-face, with a short pin on k1 inserted into a slot in k2. The two gears have different centres of rotation, so the pin must move back and forth in the slot. That increases and decreases the radius at which k2 is driven, also necessarily varying its angular velocity (presuming the velocity of k1 is even) faster in some parts of the rotation than others. Over an entire revolution the average velocities are the same, but the fast-slow variation models the effects of the elliptical orbit of the moon, in consequence of Kepler's second and third laws. The modeled rotational period of the moon pointer (averaged over a year) is 27.321 days, compared to the modern length of a lunar sidereal month of 27.321661 days. As mentioned, the pin/slot driving of the k1/k2 gears varies the displacement over a year's time, and the mounting of those two gears on the e3 gear supplies a precessional advancement to the ellipticity modelling with a period of 8.8826 years, compared with the current value of precession period of the moon of 8.85 years.[5][28][41]
The system also models the phases of the moon. The moon pointer holds a shaft along its length, on which is mounted a small gear named r, which meshes to the sun pointer at B0 (the connection between B0 and the rest of B is not visible in the original mechanism, so whether b0 is the current date/mean sun pointer or a hypothetical true sun pointer is not known). The gear rides around the dial with the moon, but is also geared to the sun — the effect is to perform adifferential gear operation, so the gear turns at the synodic month period, measuring in effect, the angle of the difference between the sun and moon pointers. The gear drives a small ball that appears through an opening in the moon pointer's face, painted longitudinally half white and half black, displaying the phases pictorially. It turns with a modeled rotational period of 29.53 days; the modern value for the synodic month is 29.530589 days.[5][28][41]
The Metonic train is driven by the drive train b1, b2, l1, l2, m1, m2, and n1, which is connected to the pointer. The modeled rotational period of the pointer is the length of the 6939.5 days (over the whole five-rotation spiral), while the modern value for the Metonic cycle is 6939.7 days.[5][28][41]
The Olympiad train is driven by b1, b2, l1, l2, m1, m2, n1, n2, and o1, which mounts the pointer. It has a computed modeled rotational period of exactly 4 years, as expected. Incidentally, it is the only pointer on the mechanism that rotates counter-clockwise; all of the others rotate clockwise.[5][28][41]
The Callippic train is driven by b1, b2, l1, l2, m1, m2, n1, n3, p1, p2, and q1, which mounts the pointer. It has a computed modeled rotational period of 27758 days, while the modern value is 27758.8 days.[5][28][41]
The Saros train is driven by b1, b2, l1, l2, m1, m3, e3, e4, f1, f2, and g1, which mounts the pointer. The modeled rotational period of the Saros pointer is 1646.3 days (in four rotations along the spiral pointer track); the modern value is 1636.33 days.[5][28][41]
The Exeligmos train is driven by b1, b2, l1, l2, m1, m3, e3, e4, f1, f2, g1, g2, h1, h2, and i1, which mounts the pointer. The modeled rotational period of the Exeligmos pointer is 19,756 days; the modern value is 19755.96 days.[5][28][41]
Apparently, gears m3, n1-3, p1-2, and q1 did not survive in the wreckage. The functions of the pointers were deduced from the remains of the dials on the back face, and reasonable, appropriate gearage to fulfill the functions was proposed, and is generally accepted.[5][28][41]

Proposed gear schemes[edit]

Because of the large space between the mean sun gear and the front of the case and the size of and mechanical features on the mean sun gear it is very likely that the mechanism contained further gearing that either has been lost in or subsequent to the shipwreck or, was removed before being loaded onto the ship.[6] This lack of evidence and nature of the front part of the mechanism has led to numerous attempts to emulate what the Greeks of the period would have done and, of course, because of the lack of evidence many solutions have been put forward.
Wright proposal
Evans et al. proposal
Freeth et al. proposal
Michael Wright was the first person to design and build a model with not only the known mechanism, but also, with his emulation of a potential planetarium system. He suggested that along with the lunar anomaly, adjustments would have been made for the deeper, more basic solar anomaly (known as the "first anomaly"). He included pointers for this "true sun", Mercury, Venus, Mars, Jupiter, and Saturn, in addition to the known "mean sun" (current time) and lunar pointers.[6]
Evans, Carman, and Thorndike published a solution with significant differences from Wright's.[38] Their proposal centred on what they observed as irregular spacing of the inscriptions on the front dial face, which to them seemed to indicate an off centre sun indicator arrangement; this would simplify the mechanism by removing the need to simulate the solar anomaly. They also suggested that rather than accurate planetary indication (rendered impossible by the offset inscriptions) there would be simple dials for each individual planet showing information such as key events in the cycle of planet, initial and final appearances in the night sky, and apparent direction changes. This system would lead to a much simplified gear system, with much reduced forces and complexity, as compared to Wright's model.[38]
Their proposal used simple meshed gear trains and accounted for the previously unexplained 63 toothed gear in fragment D. They proposed two face plate layouts, one with evenly spaced dials, and another with a gap in the top of the face to account for criticism regarding their not using the apparent fixtures on the b1 gear. They proposed that rather than bearings and pillars for gears and axles, they simply held weather and seasonal icons to be displayed through a window.[38]
In a paper published in 2012 Carman, Thorndike, and Evans also proposed a system of epicyclic gearing with pin and slot followers.[42]
Freeth and Jones published their proposal in 2012 after extensive research and work. They came up with a compact and feasible solution to the question of planetary indication. They also propose indicating the solar anomaly (that is, the sun's apparent position in the zodiac dial) on a separate pointer from the date pointer, which indicates the mean position of the sun, as well as the date on the month dial, if the two dials are synchronised correctly. Their front panel display is essentially the same as Wright's. Unlike Wright's model however, this model has not been built physically, and is only a 3-D computer model.[6]

Internal gearing relationships of the Antikythera Mechanism, based on the Freeth and Jones proposal
The system to synthesise the solar anomaly is very similar to that used in Wright's proposal. Three gears, one fixed in the centre of the b1 gear and attached to the sun spindle, the second fixed on one of the spokes (in their proposal the one on the bottom left) acting as an idle gear, and the final positioned next to that one, the final gear is fitted with an offset pin and, over said pin, an arm with a slot that in turn, is attached to the sun spindle, inducing anomaly as the mean sun wheel turns.[6]
The inferior planet mechanism includes the sun (treated as a planet in this context), Mercury, and Venus.[6] For each of the three systems there is an epicyclic gear whose axis is mounted on b1, thus the basic frequency is the Earth year (as it is, in truth, for epicyclic motion in the sun and all the planets—excepting only the moon). Each meshes with a gear grounded to the mechanism frame. Each has a pin mounted, potentially on an extension of one side of the gear that enlarges the gear, but doesn't interfere with the teeth; in some cases the needed distance between the gear's centre and the pin is farther than the radius of the gear itself. A bar with a slot along its length extends from the pin toward the appropriate coaxial tube, at whose other end is the object pointer, out in front of the front dials. The bars could have been full gears, although there is no need for the waste of metal, since the only working part is the slot. Also, using the bars avoids interference between the three mechanisms, each of which are set on one of the four spokes of b1. Thus there is one new grounded gear (one was identified in the wreckage, and the second is shared by two of the planets), one gear used to reverse the direction of the sun anomaly, three epicyclic gears and three bars/coaxial tubes/pointers, which would qualify as another gear each. Five gears and three slotted bars in all.[6]
The superior planets systems—Mars, Jupiter, and Saturn—all follow the same general principle of the lunar anomaly mechanism.[6] Similar to the inferior systems, each has a gear whose centre pivot is on an extension of b1, and which meshes with a grounded gear. It presents a pin and a centre pivot for the epicyclic gear which has a slot for the pin, and which meshes with a gear fixed to a coaxial tube and thence to the pointer. Each of the three mechanisms can fit within a quadrant of the b1 extension, and they are thus all on a single plane parallel with the front dial plate. Each one uses a ground gear, a driving gear, a driven gear, and a gear/coaxial tube/pointer, thus, twelve gears additional in all.
In total, there are eight coaxial spindles of various nested sizes to transfer the rotations in the mechanism to the eight pointers. So in all, there are 30 original gears, seven gears added to complete calendar functionality, 17 gears, and three slotted bars to support the six new pointers, for a grand total of 54 gears, three bars, and eight pointers in Freeth and Jones' design.[6]
On the visual representation Freeth supplies in the paper, the pointers on the front zodiac dial have small, round identifying stones. Interestingly, he mentions a quote from an ancient papyrus:
...a voice comes to you speaking. Let the stars be set upon the board in accordance with [their] nature except for the Sun and Moon. And let the Sun be golden, the Moon silver, Kronos [Saturn] of obsidian, Ares [Mars] of reddish onyx, Aphrodite [Venus] lapis lazuli veined with gold, Hermes [Mercury] turquoise; let Zeus [Jupiter] be of (whitish?) stone, crystalline (?)...[43]


Investigations by Freeth and Jones reveal that their simulated mechanism is not particularly accurate, the Mars pointer being up to 38° off at times. This is not due to inaccuracies in gearing ratios in the mechanism, but rather to inadequacies in the Greek theory at that point in time. The accuracy could not have been improved until first Ptolemy put forth his Planetary Hypotheses in the second half of the second century AD and then the introduction of Kepler's Second Law.[6]
In short, the Antikythera Mechanism was a machine designed to predict celestial phenomena according to the sophisticated astronomical theories current in its day, the sole witness to a lost history of brilliant engineering, a conception of pure genius, one of the great wonders of the ancient world—but it didn’t really work very well![6]
In addition to theoretical accuracy, there is the matter of mechanical accuracy. Freeth and Jones note that the inevitable "looseness" in the mechanism due to the hand-built gears, with their triangular teeth and the frictions between gears, and in bearing surfaces, probably would have swamped the finer solar and lunar correction mechanisms built into it:
Though the engineering was remarkable for its era, recent research indicates that its design conception exceeded the engineering precision of its manufacture by a wide margin—with considerable accumulative inaccuracies in the gear trains, which would have cancelled out many of the subtle anomalies built into its design.[6]